| Customization: | Available |
|---|---|
| Type: | Signal Type Arrester |
| Structure: | Protective Gap |
|
Still deciding? Get samples of US$ 2.5/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Surge protection device to prevent lightning surge voltage in low-voltage electrical system or solar energy system (photovoltaic power supply system). These devices must be installed in parallel on the low-voltage distribution system or DC power supply system to be protected, and provide common and different modes of protection. Its installation location is recommended to be located at the front end of the household side of the distribution system or at both ends of the DC power line (solar panel side and inverter/converter side), and equipped with matching circuit breakers or fuses
Product Features| Type | G2040MT | |||||
| Test standards | EN/IEC61643-11(Type 2 /Class 2/T2/Class C) | |||||
| Maximum operating voltage(Ac)Uc | 150V | 280V | 320V | 385V | 420V | NPE:255V |
| Nominal discharge current(8/20us)In | 20kA | |||||
| Maximum discharge current (8/20us)Imax | 40kA | |||||
| Total lighting current(8/20us)L1/N→PE Itoal | 160kA | |||||
| Voltage Protection Level Up | ≤0.8kV | ≤1.0kV | ≤1.2kV | ≤1.45kV | ≤1.6kV | ≤1.5kV |
| Response time ta | <25ns | |||||
| Degree of protection | IP20 | |||||
| Range of operating temperatures | -40ºC~+80ºC | |||||
| Failure indication | Green:normal Red:invalid | |||||
| Approvals,certification | TUV/CB/CE/IEC/ROHS | |||||
| Pole | 1P/2P/3P/4P/1+NPE/3+NPE | |||||
| Remote signal interface connection capability | Available | |||||
| Protection Class | IP20 | |||||
){kind=link}